Technical Specs
LIGHT ENGINE
DLP® Type and Image Resolution:
NERO 4S UHD HDR: 1-chip DMD 0.67” UHD - 4K UHD (3840x2160 pixels): 8.3M pixels
DUAL NERO 4S UHD HDR: Dual projection system: 2x custom-tuned projectors - 1-chip DMD 0.67” UHD - 4K UHD (3840x2160 pixels): 8.3M pixels
Dynamic Range: HDR compliant, with dedicated Display Modes and 4 presets to cover the screen size from 100 to 160 inches
Lens: Super high definition pure-glass lens with telecentric optics
High-quality glass 1.36 ÷ 2.68 (+/- 5%)
Zoom range (ratio): 1.96x
Throw Distance 2,5m ÷ 9m for focus range, optimized@2.98m
Focal Length (f) (mm) 19.975(Wide) ~ 39.811 @ 2.98m
F Number 1.71(Wide) ~ 2.59 (Tele) @ 2.98m
Lens resolution: 93 lines per millimeter
Light Source and brightness(1):
NERO 4S UHD HDR: 450W lamp (dimmable) - up to 6.000 Ansi Lumens
DUAL NERO 4S UHD HDR: 2x 450W lamp (dimmable) > 10.000 Ansi Lumens
Lamp life expectancy(2): 3000 hours typical in ECO mode
Adjustable iris: 10 apertures memorized
SIM2 Perfect Fit and autofocus tracking (NOT for DUAL NERO 4S)
Remote Info function: SIM2 Customer Care 4
Live Colors Calibration 4.0
INSTALLATION
Lens Throw ratio (+/- 5%): 1.36-2.68:1
Lens Shift: Manual - Horizontal +/-30% offset (+/- 5%) Vertical+/-75% offset(+/- 5%)
Zoom & Focus: Motorized with position encoders
SIM2 Perfect Fit Setup zoom and focus values in ten different memories (NOT for DUAL NERO 4S)
INPUTS/OUTPUTS:
1 x RGBHV / YCbCr (D-Sub 15-pin female)
2 x HDMI (v.1.4a - HDCP 1.4)
1 x HDMI (v.2.0a - HDCP 2.2)
1 x HDMI audio/video out (v.1.4a - HDCP 1.4)
1 x Display Port v.1.2
1x VGA / 3x YCrCb Component
1 x USB type A for Firmware upgrade
1 x RJ45 for control communications through internal web pages
1 x RS232 for control communications
2 x IR receivers
2 x 12V, 200mA (+/- 10%), Triggers output
1 x Wired IR receiver
ELECTRONICS AND GENERAL SPECIFICATIONS
Horizontal & Vertical scan freq.: 15-91 KHz/24-120 Hz
UHD: @ 24/25/30/50/60/70/72/75 Hz
Controls: IR remote control, Keypad on rear panel, RS-232 Serial commands, RJ45 ethernet commands and internal web pages
Mains voltage range: 100-240 +/-10% (50/60 Hz)
Power Consumption: Bright: Typ. 585W, max 644W @110VAC, Typ. 555W, max 611W @220VAC;
Eco: Typ. 470W, max 517W @110VAC, Typ. 450W, max 495W @220VAC
Stand-by: < 0.5 W @110/220VAC
Projector weight: approx. 32 Kg. / 70.5 lbs
Projector dimensions (WxHxD): 528 x 215 x 582 mm (20.8” x 8.5” x 22.9”)
(1) This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in a totally dark test room with brand new lamp at full power, lamp’s native white color temperature, internal test pattern (full white) and in compliance with ANSI IT7.228-1997 specification.
(2) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty.
Due to constant product development, specifications are subject to change without notice.